Cisco 8861 Firmware Migration Master Guide

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 30 of 30
NOTE: Here is a difference between MPP firmware and CUCM firmware for your reference. The LEDs states are different between Cisco MPP
and CUCM Call Control registered endpoints. The following steps will help you understand how the LED colors of the buttons by default are
different on MPP versus a CUCM registered IP Phone.
26. Observe 7800 Line1 on the phone when it is on-hook. What color is it? How does this differ from a CUCM registered endpoint?
27. Go off-hook on 7800 Line1. What color is it? How does this differ from a CUCM registered endpoint?

Cisco 8861 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Speakerphone	Full-duplex
Display	5-inch color display
Lines	5
PoE	Yes (802.3af)
Protocols	SIP, SDP, SRTP
Wi-Fi	802.11a/b/g/n/ac
Headset Jack	Yes
Codecs	G.711, G.722, G.729, iLBC
USB Port	2 x USB 2.0
USB Ports	2 x USB 2.0
Supported Languages	Multiple (English, French, Spanish, etc.)