Cisco 8865 Series Reconfiguration Guide

Cisco MPP Phones
Manual Reconfiguration Guide
** If you are having trouble flashing your device with these URLs, please contact
your technical support team for assistance. (note the / at the end of the url, it is
required)
If the station assignment process was properly completed prior to the reboot, the
device will boot into a station specific assigned/usable state. If not, the device will
boot into a default unassigned/unusable state, and will remain in this state until the
site administrator has completed the station assignment process. If this occurs,
contact your site administrator and request that station assignment be completed for
the device in question.

Cisco 8865 Series Specifications

General

Resolution	800 x 480 pixels
Speakerphone	Full-duplex speakerphone
Codec Support	G.711, G.722, G.729, iLBC, Opus
Audio	Wideband audio
Ethernet	10/100/1000 Mbps
USB Ports	2 USB ports
Video	720p HD video
Power	IEEE 802.3af/at Power over Ethernet (PoE)
Protocols	SIP
Headset Connector	RJ9 headset port
Security	802.1X, TLS, SRTP
Weight	1.6 kg