Name: Cisco 8945
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

The Cisco Unified IP Phone 8941 and 8945 added the “secure by default” feature in Release 9.3(1). Before

phones are upgraded to Firmware Release 9.3(2)SR1, the Cisco Unified Communications Manager must

have Device Pack 8.0.3(24049)/8.5.1(14070)/8.6.2(22030) or higher installed. The phones require this

device pack. If the correct device pack is not installed first, the phones cannot successfully register to the

Cisco Unified Communications Manager.

Note

Because of the increased 9.3(2)SR1 firmware size, SIP 9.3(2)SR1 can be upgraded only from SCCP/SIP

9.3(1) or 9.3(2) releases. This means that if you want to upgrade your phone to SIP 9.3(2)SR1 from releases

before 9.3(1), you must upgrade your phone to 9.3(1) or 9.3(2) first, and then perform the upgrade to

9.3(2)SR1. This limitation applies to SIP 9.3(2)SR1 only; SCCP 9.3(2)SR1 is not affected.

Note

Related documentation

Use the following sections to obtain related information.

Cisco Unified IP Phone 8900 Series documentation

Refer to publications that are specific to your language, phone model, and Cisco Unified Communications

Manager release. Navigate from the following documentation URL:

http://www.cisco.com/en/US/products/ps10451/tsd_products_support_series_home.html

Cisco Unified Communications Manager documentation

See the Cisco Unified Communications Manager Documentation Guide and other publications that are specific

to your Cisco Unified Communications Manager release. Navigate from the following documentation URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html

Cisco Business Edition 5000 documentation

See the Cisco Business Edition 5000 Documentation Guide and other publications that are specific to your

Cisco Business Edition 5000 release. Navigate from the following URL:

http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html

New and changed features

This release contains no new or changed features.

Cisco Unified IP Phone 8941 and 8945 Release Notes for Firmware Release 9.3(2)SR1

Cisco Unified IP Phone 8941 8945 Release Notes for Firmware Release 9.3(2)SR1

Cisco 8945 Release Notes

Other manuals for Cisco 8945