viii
Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide
OL-23778-01
About This Guide
Objectives
This guide explains how to install, maintain, and troubleshoot your router hardware.
It provides the minimum software configuration information. For the detailed configuration procedures,
see the Cisco IOS configuration guide and command reference publications. For more information, see
the
“Obtaining Documentation, Obtaining Support, and Security Guidelines” section on page x.
Warranty, service, and support information is in the Cisco Information Packet that is shipped with your
router.
Audience
This guide is designed for personnel who install, configure, and maintain the router. These persons
should be familiar with electronic circuitry and wiring practices and be experienced electronic or
electromechanical technicians. This guide identifies certain procedures that should be performed only
by trained and qualified personnel.
Organization
Conventions
Note Means reader take note.
Tip Means the following information will help you solve a problem.
Chapter Title Description
Chapter 1 Introduction Describes the hardware features and specifications of
the routers.
Chapter 2 Preparing to Install the Router Describes safety recommendations, site requirements,
network connection considerations, required tools and
equipment, and provides the installation checklist.
Chapter 3 Installing the Cisco ASR 901
Mobile Wireless Router
Includes router installation information, and shows
how to connect the router console/auxiliary port.
Appendix A Troubleshooting Describes how to isolate problems, read LEDs,
interpret error and status messages, and recover
software images.
Appendix B Cable Specifications Provides cable specifications to use if you plan to build
your own cables.
Appendix C Site Log Provides example site log.
To Next Page
Loading...
Need help?
General
