2-15
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
OL-32138-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Figure 2-8 Mounting Bracket for Wall and Pole Mounting
Step 2 Use four customer-supplied screws and optional screw-anchors to attach the mounting plate to the
mounting surface.
Note If necessary, use suitable screw anchors and an exterior-grade plywood backboard to mount the access
point to stucco, cement or drywall.
Figure 2-9 Mounting Bracket Dimensions
1 Quick Mount Keyhole Slots (for AP use) 2 Mounting Slots (used with the band clamps)
3 Bracket Mount Holes (use bolts up to 1/4" or
6 mm in diameter)
To Next Page
Loading...
