Cisco Aironet AIR-AP1200 - Page 31

2-5
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-05
Chapter 2 Installing the Access Point
Before Beginning the Installation
Figure 2-2 Access Point with 5-GHz Radio Module (RM20A or RM21A)
Figure 2-3 RM22A Radio Module with External RP-TNC Antenna Connectors
]
Note Only connect Cisco 5-GHz antennas with blue labels or blue dots to the RM22A radio module.
1 Module mounting screws 3 Access point
2 Integrated antenna in patch position
(RM20A or RM21A radio module)
74631
1 1 2 3
1 Left 5-GHz antenna connector (RP-TNC) 4 Right 5-GHz antenna connector (RP-TNC)
2 Blue 5-GHz label 5 5-GHz radio
3 Module mounting screws