Cisco Aironet AIR-AP1200 - Assigning Basic Settings

3-6
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-05
Chapter 3 Configuring the Access Point for the First Time
Assigning Basic Settings
Step 5 Click Express Setup. The Express Setup screen appears. Figure 3-3 shows the Express Setup page.
Figure 3-3 Express Setup Page
Step 6
Enter the configuration settings you obtained from your system administrator. The configurable settings
include:
• System Name— The system name, while not an essential setting, helps identify the access point on
your network. The system name appears in the titles of the management system pages.
• Configuration Server Protocol—Click on the button that matches the network’s method of IP
address assignment.
– DHCP—IP addresses are automatically assigned by your network’s DHCP server.
– Static IP—The access point uses a static IP address that you enter in the IP address field.