EasyManua.ls Logo

Cisco AMP PC3000 - Rear Panel

Cisco AMP PC3000
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Temperature status
Green—The appliance is operating at
normal temperature.
Amber—One or more temperature
sensors breached the critical
threshold.
Amber, flashing—One or more
temperature sensors breached the
unrecoverable threshold.
9
Rear Panel
The following figure shows the rear panel of the AMP PC3000.
Figure 6: Rear Panel
PCIe riser 2 (PCIe slots 4, 5, 6)
PCIe riser 2 is not supported.
2PCIe riser 1 (PCIe slot 1, 2, 3)
PCIe slot 3 is used for the SFP+ ports.
PCIe slots 1 and 2 are not supported.
1
Power supplies (two, redundant as 1+1)42.5-inch HDD bays containing 1.2-TB SAS
HDDs for the recovery partition
3
Modular LAN-on-motherboard (mLOM)
card slot (x16)
6Threaded holes for dual-hole grounding
lug
5
Dual 1-Gb/10-Gb Ethernet ports (LAN1
and LAN2)
The dual LAN ports can support 1 Gbps
and 10 Gbps depending on the link partner
capability.
82 USB 3.0 Type A ports7
1-Gb Ethernet dedicated Cisco Integrated
Management Controller (CIMC) port
10VGA video port (DB-15 connector)9
Cisco AMP PC3000 Hardware Installation Guide
8
Overview
Rear Panel

Related product manuals