Cisco AMP PC3000 - CHAPTER 1 Overview; Features

CHAPTER 1
Overview
• Features, on page 1
• Package Contents, on page 2
• Serial Number Location, on page 3
• Front Panel, on page 5
• Front Panel LEDs, on page 6
• Rear Panel, on page 8
• Rear Panel LEDs, on page 9
• Power Supply, on page 10
• Hardware Specifications, on page 11
• Product ID Numbers, on page 12
• Power Cord Specifications, on page 12
Features
The Cisco AMP PC3000 appliance supports AMP Private Cloud version 3.0 and later.
The following table lists the features of the Cisco AMP PC3000. See Product ID Numbers, on page 12 for a
list of the spare product IDs (PIDs) associated with the AMP PC3000. You can remove and replace drives
and power supplies. For all other internal component failures, you must send your chassis for RMA.
Table 1: AMP PC3000
DescriptionFeature
2 RUForm factor
Yes
Standard 19-in. (48.3 cm) 4-post EIA rack
Rack mount
Front to rear
Cold aisle to hot aisle
Airflow
Displays the serial number.Pullout asset card
Cisco AMP PC3000 Hardware Installation Guide
1