hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Only the approved power cords and jumper cords provided with the AMP PC3000 are supported.
Note
The following power cords and jumper cords are supported.
Figure 8: Argentina CAB-250V-10A-AR
Cord set rating: 10 A, 250 V2Plug: IRAM 20731
Connector: IEC 60320/C133
Figure 9: Australia CAB-9K10A-AU
Cord set rating: 10 A, 250 V2Plug: A.S. 3112-20001
Connector: IEC 60320/C153
Figure 10: Brazil PWR-250V-10A-BZ
Cisco AMP PC3000 Hardware Installation Guide
13
Overview
Power Cord Specifications
To Next Page
Loading...
