Cisco ASR 5000 Series Installation And Administration Guide

Veritas Cluster Installation and Management
Installing Hardware ▀
Cisco ASR 5000 Series External Storage Server Installation and Administration Guide ▄
OL-22979-03
21
ip:
netmask:
router:
Are these correct? (y/n)
Step 14 The machine will reboot, and comes up in multi-user mode.
Step 15 Log on as root with the corresponding password.
Step 16 Remove the “Boot/Install DVD” from the DVD-ROM.
Step 17 Set the Ethernet interface to full-duplex mode.
Step a .................... Create the script /etc/rc2.d/S68net_tume as shown below:
-------cut from here------
#!/sbin/sh
# /etc/rc2.d/S68net-tune
PATH=/usr/bin:/usr/sbin
echo "Implementing Solaris ndd Tuning Changes "
# bge-Interfaces
# Force bge0 to 100fdx autoneg off
ndd -set /dev/bge0 adv_1000fdx_cap 0
ndd -set /dev/bge0 adv_1000hdx_cap 0
ndd -set /dev/bge0 adv_100fdx_cap 1
ndd -set /dev/bge0 adv_100hdx_cap 0
ndd -set /dev/bge0 adv_10fdx_cap 0
ndd -set /dev/bge0 adv_10hdx_cap 0
ndd -set /dev/bge0 adv_autoneg_cap 0
-------end script-------
Step b ................... Make the script executable.
# chmod 755 /etc/rc2.d/S68net_tune
Step 18 Edit the file, /etc/ssh/sshd_config, and change the line, “#PermitRootLogin yes”, so that it reads, “PermitRootLogin
yes”. This will only be a temporary change to allow remote access until user accounts are created.
Step 19 Restart the SSH daemon to make changes take effect.

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English