Veritas Cluster Installation and Management
▀ Configuring Veritas Volume Manager and Veritas Cluster
▄ Cisco ASR 5000 Series External Storage Server Installation and Administration Guide
-- SYSTEM STATE
-- System State Frozen
A less3 RUNNING 0
A less4 RUNNING 0
-- GROUP STATE
-- Group System Probed AutoDisabled State
B LAPP less3 Y N ONLINE
B LAPP less4 Y N OFFLINE
Step 20 Enable the SNMP traps/alarms and edit the main.cf file under /etc/VRTSvcs/conf/config to add the following entries:
NotifierMngr LAPP-Notif-Mgr (
SnmpdTrapPort = 162
SnmpConsoles = { "<SNMP_IP_Address>" = Information }
)
Step 21 Verify and regenerate the new config.
root@less3 # hacf verify /etc/VRTSvcs/conf/config/
root@less3 # hacf generate /etc/VRTSvcs/conf/config/
Then, restart both the nodes by executing the following command:
root@less3 # hastart
root@less4 # hastart
For more details on the installation of Veritas Volume Manager and Veritas Cluster configuration, refer to the Veritas
Documentation.