Cisco ASR 5000 Series - Page 59

L-ESS Installation and Configuration
Installing L-ESS Application in Cluster Mode ▀
Cisco ASR 5000 Series External Storage Server Installation and Administration Guide ▄
OL-22979-03
59
Parameter
Description
Default
Value
Directory poll
interval for source
Type the pull poll interval, in seconds, for pulling the record files from chassis or host. The
value must be an integer from 10 through 3600.
30
File name format
for source
Select from the currently available file formats for xDR files.
 [1]
FIELDSEP(_)_STR_RULEBASENAME_TIMESTAMP_RSTIND_SEQUENCEN
O(0,999999999)
 [2]
FIELDSEP(_)_STR_RULEBASENAME_TIMESTAMP_RSTIND_SEQUENCEN
O(0,999999999)_PSCNO
 [3]
FIELDSEP(_)_STR_RULEBASENAME_TIMESTAMP_SEQUENCENO(0,99999
9999)
 [4] FIELDSEP(_)_STR-RULEBASENAME_STR_TIMESTAMP
 [5]
FIELDSEP(_)_STR_TIMESTAMP(MM_DD_YYYY+HH:MM:SS)_STR_STR(file
)SEQUENCENO(1,4294967295).EXT
 [6]
FIELDSEP(_)_STR_TIMESTAMP(MM_DD_YYYY+HH:MM:SS)_STR_STR(file
)SEQUENCENO(1,4294967295)
 [7]
FIELDSEP(_)_STR_TIMESTAMP(MM_DD_YYYY+HH:MM:SS)_STR_STR(file
)SEQUENCENO(1,999999).EXT
 [8] FIELDSEP(_)_STR_STR_TIMESTAMP(YYYYMMDDHHMMSS).EXT
 [9] ACR_FILEFORMAT
Important: Modification in file format requires restart of L-ESS.
You can also customize your own format according to the file naming convention.
1
Delete files from
source
Type (Y)es to delete record files from source directory after fetching.
y
Report missed files
from remote source
Type (Y)es to activate alarm when files are found missing while pulling them from the
chassis.
Important: This feature is allowed only if file naming format contains
sequence number.
Important: This particular alarm generation can be enabled only if the
deletion of EDR or UDR files from remote host is enabled and the SNMP support
is enabled.
y