Cisco ASR 5000 Series Installation And Administration Guide

Configuring the L-ESS Server
L-ESS Server Configuration ▀
Cisco ASR 5000 Series External Storage Server Installation and Administration Guide ▄
OL-22979-03
71
Parameter
Description
Default Value
maxinfotimestampdiff
L-ESS uses this configurable to test whether L-ESS on
startup is referring to old information about missing files.
The configured value indicates the maximum allowed
difference between the current time stamp and the timestamp
at which information for identifying missing files was
written.
If the difference exceeds, L-ESS will assume fresh restart
and will restart identifying missing files ignoring previous
information.
Minimum value allowed is 30 minutes and maximum
allowed is 1440 minutes (24 hours). Default is 60 minutes.
60
ServerIpAddress
This specifies the IP address that is used by L-ESS to create
TCP socket. In case of stand alone installation this should be
the machine's IP address and in case of cluster based
installation this should be Logical Host's IP address. Default
is current machine's IP address.
N/A
ServerPort
This port is used when creating TCP sockets to avoid
starting of similar L-ESS instances on same L-ESS machine.
The default value for this parameter is 22222. The limit is
within 1025 to 65535.
Important: Do not change this port unless
it is absolutely required.
22222

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English