EasyManuals Logo
Home>Cisco>Network Router>ASR 900 Series

Cisco ASR 900 Series Release Notes

Cisco ASR 900 Series
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
53
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
Chapter
Caveats in Cisco IOS XE 3.7S Releases
• CSCub78861
Symptom: Following a reload, the router handles CFM only on 128 VLANs or bridge-domains.
Conditions: Occurs when the router configuration contains CFM and more than 128 VLANs or
bridge-domains.
Workaround: There is no workaround.
• CSCuc00986
Symptom: The router drops MPLS TP sessions, impacting traffic.
Conditions: Occurs following an software upgrade (ISSU).
Workaround: There is no workaround.
• CSCuc23610
Symptom: The router does not pass IP traffic with an MPLS LDP tunnel label of Imp-null.
Conditions: Occurs when the router is switching traffic using IP fast-reroute (FRR).
Workaround: Configure the mpls ldp explicit-null command.
• CSCuc31037
Symptom: The router stops passing traffic on pseudowire connections.
Conditions: Occurs in a redundant system following a stateful switchover (SSO).
Workaround: There is no workaround.
• CSCuc34088
Symptom: The router passes lower traffic levels when you add links to an IMA bundle and perform
IM OIR/router reload.
Conditions: Occurs when you send traffic above the E1 line rate on one link within an IMA bundle
and reset (OIR) the interface module.
Workaround: Remove and re-apply the IMA interface configuration.
• CSCuc36522
Symptom: The router does not timestamp traffic on port-channel interfaces.
Conditions: Occurs when you configure a CFM EVC bridge-domain up MEP on a port-channel.
Workaround: There is no workaround.
• CSCuc42085
Symptom: The 1PPS output from the ASR 903 is out of range when compared to the 1PPS output
of the PTP master clock.
Conditions: Occurs when the router is configured as a hybrid clock (ordinary/boundary) and there
are intermediate hops between the router and the PTP master clock. To date the problem occurs only
when the intermediate hops are through an ASR 9000 router.
Workaround: There is no workaround.
• CSCuc42206
Symptom: Links on copper SFP interface flap during stateful switchover (SSO).
Conditions: Occurs when you initiate a stateful switchover (SSO) on a redundant system with a
copper SFP.
Workaround: There is no workaround.

Table of Contents

Other manuals for Cisco ASR 900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 900 Series and is the answer not in the manual?

Cisco ASR 900 Series Specifications

General IconGeneral
BrandCisco
ModelASR 900 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals