CHAPTER
1
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
2
New Features in Cisco IOS XE 3.6S Releases
This chapter provides information about the new features introduced in the Cisco IOS XE Release 3.6S.
Note Cisco IOS XE 3.6S inherits all supported features from Cisco IOS Release 3.5, which is not described
in this document. For more information about Cisco IOS Release 3.5, see the Release Notes for Cisco
IOS XE Release 3S.
This chapter includes the following sections:
• New Hardware Features in Cisco IOS XE Release 3.6(2)S, page 1
• New Hardware Features in Cisco IOS XE Release 3.6(1)S, page 1
• New Hardware Features in Cisco IOS XE Release 3.6S, page 1
• New Software Features in Cisco IOS XE Release 3.6(2)S, page 2
• New Software Features in Cisco IOS XE Release 3.6(1)S, page 2
• New Software Features in Cisco IOS XE Release 3.6S, page 4
New Hardware Features in Cisco IOS XE Release 3.6(2)S
The IOS XE 3.6(2)S Release for the Cisco ASR 903 Router does not introduce any new hardware
features.
New Hardware Features in Cisco IOS XE Release 3.6(1)S
The IOS XE 3.6(1)S Release for the Cisco ASR 903 Router does not introduce any new hardware
features.
New Hardware Features in Cisco IOS XE Release 3.6S
The IOS XE 3.6(0)S Release for the Cisco ASR 903 Router introduces support for the following
hardware features:
• New SFP modules—This release introduces support for the following SFP modules:
–
1000M SFP-DWDM-SFP
To Next Page
Loading...
