Cisco ASR 900 Series Release Notes

3
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
Chapter
Caveats in Cisco IOS XE 3.11S Releases
Resolved Caveats—Cisco IOS XE Release 3.11.1S
This section documents the issues that have been resolved in Cisco IOS XE Release 3.11.1S.
• CSCuj34652
Symptom: IPv6 traffic drops for the packets with next header options. Next header options include
Hop-by-hop options, fragment header.
Conditions: This issue occurs when option packets are punted to CPU and generates the time
exceeded message.
Workaround: There is no workaround.
• CSCuj43795
Symptom: The port in error-disabled state & physical status shows as down but is UP on the other
connected end device.
Conditions: This issue occurs when the port is configured with DHCP rate limiting values so that
the port goes to error-disable state once it reaches the rate configured.
Workaround: Perform a shutdown followed by a no shutdown on the respective interface to move
the port to UP state.
• CSCuj60771
Symptom: Self-generated DHCP traffic generating out of the router is not getting marked (cos) with
user specified value.
Conditions: This issue occurs when DHCP packets (CPU to client) are not getting marked.
Workaround: There is no workaround.
• CSCuj83619
Symptom: DHCP binding does not happen with multiple clients over T-EFP.
Conditions: This issue occurs when TEFP with multiple vlans are configured.
Workaround: Configure EFPS instead of TEFP.
• CSCul65485
Symptom: Wrong speed and bandwidth is displayed with DWDM XFP
Conditions: This issue occurs when the DWDM XFP is inserted and the show interface command
is executed.
Workaround: There is no workaround.
CSCul65832
Symptom: Multicast VPN traffic is not received by the receivers.
Conditions: This issue occurs the multicast traffic is begins and joins the VRFs.
Workaround: Increase the MTU size of the core interface on the router that is not forwarding the
mVPN traffic.
• CSCul70905
Symptom: Warning messages are seen when an hsrp group is configured on the physical interface.
Conditions: This issue occurs when an hsrp group is configured on the physical interface.
Workaround: There is no workaround.
• CSCum14431

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English