EasyManuals Logo
Home>Cisco>Network Router>ASR 900 Series

Cisco ASR 900 Series Release Notes

Cisco ASR 900 Series
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #272 background imageLoading...
Page #272 background image
18
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
Chapter
Caveats in Cisco IOS XE 3.10S Releases
CSCug36590
Symptom: The Cisco ASR 903 router displays the following error message:
%IDBINDEX_SYNC-4-RESERVE: Failed to lookup existing ifindex for an interface on the
Standby, allocating a new ifindex from the Active (ifindex=126, idbtype=SWIDB)
Conditions: This issue is observed when you create an ATM channel, create a POS link, or create
DS3 links.
Workaround: There is no workaround.
CSCug43550
Symptom: The receiver node crashes when the number of traffic sources increases beyond 400 with
196 OIFs at the receiver end.
Conditions: This issue is observed when 196 IGMP packets are sent to a node per second.
Workaround: Reduce the number of IGMP packets to four per second.
CSCug84082
Symptom: Ping fails and traffic drops on ATM/IMA PVP links configured on either T1E1 IM or
OC3 IM.
Conditions: This issue is observed when you perform an SSO and flap the ATM/IMA link.
Workaround: Perform an IM OIR or reload the router.
CSCug96003
Symptom: When operating with a large number of TCP Raw Socket connections (greater than 512)
and with traffic on all of them we saw some TCP retransmissions.
Conditions: The issue occurred in a stress test within a lab setup.
Workaround: None required.
CSCuh06123
Symptom: QL mapping is incorrect on the PTP master.
Conditions: This issue is observed when you first reboot the router or configure and unconfigure
the router multiple times.
Workaround: Reconfigure the Ql values.
CSCuh33291
Symptom: The Cisco ASR 903 router generates linkDown traps when an interface changes from
administratively down state to down state.
Conditions: This issue is observed when an interface changes from administratively down state to
down state.
Workaround: There is no workaround.
CSCuh33314
Symptom: When you perform an ISSU or terminate the IOMd process, IOMd crashes on the
standby RSP.
Conditions: This issue is observed when you terminate the IOMd process on the active RSP or when
you perform an ISSU.
Workaround: There is no workaround.
CSCuh81658

Table of Contents

Other manuals for Cisco ASR 900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 900 Series and is the answer not in the manual?

Cisco ASR 900 Series Specifications

General IconGeneral
BrandCisco
ModelASR 900 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals