EasyManuals Logo

Cisco ASR 900 Series Release Notes

Cisco ASR 900 Series
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #277 background imageLoading...
Page #277 background image
23
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
Chapter
Caveats in Cisco IOS XE 3.10S Releases
• CSCud55695
Symptom: When you apply a QoS policy with a port level class-default configuration containing a
shaper value to a serial interface, the router applies the shaper value to the channel-level PIR for all
serial interfaces on the IM.
Conditions: This issue is observed when you apply a QoS policy with a port level class-default
configuration containing a shaper value to a serial interface.
Workaround: Add a dummy class-default level at the top of the policy and apply the shaper as a
child policy.
• CSCud55799
Symptom: Multiple priority commands are accepted per policy.
Conditions: This issue is observed when you have a policy map with priority configured in one of
its classes. Add another class with policer first and with priority.
Workaround: There is no work around.
• CSCud56364
Symptom: Convergence time for POS links for RSP SSO is about four to seven seconds.
Conditions: This issue is observed when all four POS links are created on OC-3 IM. This issue is
not observed on port 0 of OC-3 IM.
Workaround: There is no work around.
• CSCud61551
Symptom: The serial number of the RSP in slot 1 is sometimes not displayed in the show inventory
command output.
Conditions: This issue is sometimes observed in the show inventory command output.
Workaround: Reload the router.
• CSCud64129
Symptom: The router displays command options to configure control-plane policing, which is not
supported.
Router(config)# control-plane
Router(config-cp)# service-policy ?
input Assign policy-map to the input of an interface
output Assign policy-map to the output of an interface
Conditions: This issue is observed when you attempt to configure control plane policing to restrict
traffic by the CPU.
Workaround: There is no workaround. This feature is not supported.
• CSCud71286
Symptom: Configuration synchronization failure is noticed on the interfaces.
Conditions: This issue is observed when you disable autonegotiation and configure the interface
speed as 100 or 1000.
Workaround: There is no workaround. There is no impact on functionality.

Table of Contents

Other manuals for Cisco ASR 900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 900 Series and is the answer not in the manual?

Cisco ASR 900 Series Specifications

General IconGeneral
BrandCisco
ModelASR 900 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals