Name: Cisco ASR 900 Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router

OL-26630-12

Chapter

New Software Features in Cisco IOS XE Release 3.11S

ISIS and OSPF Local Microloop Protection

For ISIS Micoloop Protection, see

http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_isis/configuration/xe-3s/irs-uloop-local-avoid.ht

For OSPF Microloop Protections, see

http://www.cisco.com/en/US/partner/docs/ios-xml/ios/iproute_ospf/configuration/xe-3s/iro-ospfv2-ip-f

rr.html

MR-APS Integration with Hotstandby Pseudowire

This feature is a protection mechanism for Synchronous Optical Network (SONET) networks that

enablesSONET connections to switch to another SONET circuit when a circuit failure occurs.For more

information see,

http://www.cisco.com/en/US/docs/routers/asr903/software/guide/b_MR_APS_ASR903.html

Remote SPAN

This feature is used for remote monitoring of multiple devices at source port, source Vlan levels in the

Layer2 network. For more information, see

http://www.cisco.com/en/US/docs/routers/asr903/software/guide/b_layer2_ASR903_chapter_01.html

Service Groups

The Service groups feature allows you to create service groups and apply aggregate features to those

service groups.

For more information, see

http://www.cisco.com/en/US/docs/routers/asr903/software/guide/b_QoS_guidelines_903_chapter_00.h

tml

TCAM Threshold Based Alarms

This feature generates syslog and consequently a Simple Network Management Protocol (SNMP) trap

when an application reaches the preset threshold for its allotted TCAM size.

For more information, see

http://www.cisco.com/en/US/docs/routers/asr903/software/guide/b_TCAM_alarms_ASR903.html.

Cisco ASR 900 Series Release Notes

Other manuals for Cisco ASR 900 Series