EasyManuals Logo
Home>Cisco>Network Router>ASR 900 Series

Cisco ASR 900 Series Release Notes

Cisco ASR 900 Series
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
11
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
OL-26630-12
Chapter
Caveats in Cisco IOS XE 3.7S Releases
Symptom: The router experiences remote CFM MEP flapping.
Conditions: Occurs when the router is connected via a CFM xconnect and the link is running a high
traffic rate.
Workaround: Reduce the rate of traffic.
• CSCua99096
Symptoms: The show ima interface command omits some IMA group information such as
ImaGroupSymmetry.
Conditions: This issue occurs when the show ima interface command.
Workaround: There is no workaround.
• CSCub94462
Symptom: The router displays object download error messages on the console.
Conditions: This issue occurs under the following conditions
–
Execute the mac address sticky command.
–
Configure 25 incremental MAC addresses and execute the clean mac-address-table bdomain
command
–
Remove a mac security sticky configuration from an EVC interface.
Workaround: Avoid issuing the clear mac-address-table command when the mac security sticky
command is applied.
• CSCuc08397
Symptom: When IFM is configured on EVC BD, with encapsulation default in the core, the remote
MEPS are not learnt.
Conditions: This issue is seen when encapsulation default is configured on the core facing side.
Workaround: There is no workaround.
• CSCud09142
Symptom: FP active error messages are seen when the tunnel-tp interface is removed in a
high-availability setup.
Conditions: This issue is seen after removing tunnel-tp interface.
Workaround: There is no workaround.
• CSCud34600
Symptom: Event hog messages are received when 21k to 25k routes are advertised into MBGP and
exported from one PE to another.
Conditions: This issue occurs when the redistributing routes range from 21k to 25k routes from
OSFP are moved into MBGP and are exported from one PE to another.
Workaround: There is no workaround.
• CSCud90362
Symptom: the SYNC packets go out quite irregularly when PTP master is configured.
Conditions: This issue is seen when the router is configured as PTP master.
Workaround: There is no workaround.
• CSCue24854
Symptom: Loss of 70 msec are observed when performing an IM OIR in a remote LFA ring.

Table of Contents

Other manuals for Cisco ASR 900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 900 Series and is the answer not in the manual?

Cisco ASR 900 Series Specifications

General IconGeneral
BrandCisco
ModelASR 900 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals