Cisco ASR 9000v User Manual

Figure 106: Removing a Switch Fabric Card from the Cisco ASR 9922 Router Chassis
Pivot the ejector levers
outward to unseat the
card from the backplane
connector.
cLoosen the captive
screws.
a
Slide the card out of the
chassis.
dPush in both ejector lever
release buttons.
b
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
99
Unpacking and Installing the Chassis
Removing RP Cards, Fabric Cards, and Line Cards from the Cisco ASR 9922 Router and Cisco ASR 9912 Router

Cisco ASR 9000v Specifications

General

Chassis Type	Virtual
Operating System	Cisco IOS XR
Form Factor	Virtual Appliance
Type	Virtual Router
License Required	Yes
Supported Platforms	VMware ESXi, KVM, Microsoft Hyper-V
Interfaces	Virtual Ethernet
High Availability	Yes
Management	CLI, NETCONF
Protocols	BGP, OSPF, IS-IS, MPLS, IPv4, IPv6
Product Family	Cisco ASR 9000 Series
Encryption Support	Yes