Cisco ASR 9000v

Figure 169: Installing a Version 2 or Version 3 Power Module in the Cisco ASR 9010, 9912, 9922 Routers
Figure 170: Installing a Version 2 Power Module in the Cisco ASR 9904 Router
Installing DC Power Modules
Required Tools and Equipment
You need the following tool to perform this task:
• 7/16 hex socket and torque wrench, torque 50 in-lb.
Steps
Follow these steps to reinstall the DC power modules back into the chassis (see Figure 168: Installing a Version
1 Power- Module, on page 160 for the version 1 power module or Figure 169: Installing a Version 2 or Version
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
161
Installing Cards and Modules in the Chassis
Installing DC Power Modules