Cisco ASR 9000v User Manual

Figure 198: Version 1 Power Module Status Indicators
ON continuously when the input
voltage is present and within the
correct range
BLINKING when the input voltage
is out of acceptable range
OFF when no input voltage is
present
Input power LED1
ON when the power module output
voltage is present
BLINKING when the power
module is in a power limit or
overcurrent condition
Output power LED2
ON to indicate that a power module
failure has occurred
Fault LED3
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
204
Troubleshooting the Installation
Troubleshooting the AC Input Power Subsystem

Cisco ASR 9000v Specifications

General

Chassis Type	Virtual
Operating System	Cisco IOS XR
Form Factor	Virtual Appliance
Type	Virtual Router
License Required	Yes
Supported Platforms	VMware ESXi, KVM, Microsoft Hyper-V
Interfaces	Virtual Ethernet
High Availability	Yes
Management	CLI, NETCONF
Protocols	BGP, OSPF, IS-IS, MPLS, IPv4, IPv6
Product Family	Cisco ASR 9000 Series
Encryption Support	Yes