Name: Cisco ASR 9006
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Procedure

Step 1 Remove any strapping on the outside of the crate.

Step 2 Remove the crate cap door. Disengage the twist locks located along the bottom first. Then, disengage the twist

locks located along the sides, working your way up from the bottom to the top. Refer to the right and middle

figures in Figure 73: Unpacking the Cisco ASR 9922 Router from the Shipping Container, on page 69.

Step 3 Remove the crate cap. Disengage the twist locks located around the bottom of the crate cap (Figure 73:

Unpacking the Cisco ASR 9922 Router from the Shipping Container, on page 69).

Two people are required to evenly slide the crate cap back off of the plastic pallet base.

Note

Step 4 Remove the foam packaging material from the top of the router.

Figure 73: Unpacking the Cisco ASR 9922 Router from the Shipping Container

Step 5 Using a 5/16” wrench or ratchet, remove the four attachment bolts and cross-brace from the shipping rack

(see the figure below).

Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide

Unpacking and Installing the Chassis

Unpacking the Cisco ASR 9922 Router

Cisco ASR 9006 Specifications

General

Cisco ASR 9006 Installation Guide

Other manuals for Cisco ASR 9006