Cisco ASR 9010 Unpacking And Installing

Figure 67: NEBS Bonding and Grounding for the Cisco ASR 9912 Router
Installing Chassis Accessories
The Cisco ASR 9000 Series Routers ship with a base set of chassis accessories. To install the base accessories
and optional accessories, see the appropriate installation procedure below for your router:
Base Accessories
The Cisco ASR 9904 Router and Cisco ASR 9910 Router do not include base chassis accessories.
Note
Optional Accessories
Installing Base Chassis Accessories on the Cisco ASR 9010 Router
The base chassis accessories for the Cisco ASR 9010 Router include:
• Two ball studs
• Two plastic side strips
• One accessory front grill
Unpacking and Installing the Chassis
68
Unpacking and Installing the Chassis
Installing Chassis Accessories

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor