Cisco ASR 903 Guide

Layer 2 Solution
G.8032 ▀
Cisco ASR 903 Router Design and Deployment Guide▄
OL-30526-01
23
profile g8032_profile
rpl port0 owner
inclusion-list vlan-ids 10,1000-2999
aps-channel
port0 service instance 1
port1 service instance 1
!
!
ASR903-R2 Configuration
ethernet cfm ieee
ethernet cfm domain g8032_domain level 1
service g8032_service evc evc_name vlan 10 direction down
continuity-check
continuity-check interval 3.3ms
!
!
ethernet evc evc_name
!
interface GigabitEthernet0/2/0
no ip address
negotiation auto
service instance 1 ethernet evc_name
encapsulation dot1q 10
bridge-domain 10
cfm mep domain g8032_domain mpid 1
continuity-check static rmep
rmep mpid 2
!
service instance trunk 1000 ethernet
encapsulation dot1q 1000-2999
rewrite ingress tag pop 1 symmetric
bridge-domain from-encapsulation
!
interface GigabitEthernet0/2/1
no ip address
negotiation auto
service instance 1 ethernet evc_name
encapsulation dot1q 10
bridge-domain 10
cfm mep domain g8032_domain mpid 2
continuity-check static rmep
rmep mpid 1
!
service instance trunk 1000 ethernet
encapsulation dot1q 1000-2999

Cisco ASR 903 Specifications

General

Form Factor	Modular
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% non-condensing
Redundancy	Yes, redundant power supplies and route processors
Operating System	Cisco IOS XE
Power Supply	AC or DC
Switching Capacity	240 Gbps
Operating Temperature	-40°C to 65°C (-40°F to 149°F)
MTBF	200, 000 hours
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, T1/E1