Cisco ASR 903 Guide

Virtual Private LAN Service - VPLS
▀ VPLS – BGP Auto-discovery and Signaling
▄ Cisco ASR 903 Router Design and Deployment Guide
70
OL-30526-01
PE-2 configuration
l2vpn vfi context VPLS30
vpn id 30
autodiscovery bgp signaling bgp
ve id 34
bridge-domain 30
member GigabitEthernet0/0/4 service-instance 2
member vfi VPLS30
router bgp 100
neighbor 10.10.1.1 remote-as 100
neighbor 10.10.1.1 update-source Loopback10
neighbor 10.10.3.3 remote-as 100
neighbor 10.10.3.3 update-source Loopback10
!
address-family l2vpn vpls
neighbor 10.10.1.1 activate
neighbor 10.10.1.1 send-community extended
neighbor 10.10.1.1 suppress-signaling-protocol ldp
neighbor 10.10.3.3 activate
neighbor 10.10.3.3 send-community extended
neighbor 10.10.3.3 suppress-signaling-protocol ldp
PE-3 configuration
l2vpn vfi context VPLS30
vpn id 30
autodiscovery bgp signaling bgp
ve id 33 ç
bridge-domain 30
member GigabitEthernet0/0/7 service-instance 2
member vfi VPLS30
router bgp 100
neighbor 10.10.1.1 remote-as 100
neighbor 10.10.1.1 update-source Loopback10
neighbor 10.10.2.2 remote-as 100
neighbor 10.10.2.2 update-source Loopback10
!
address-family l2vpn vpls
neighbor 10.10.1.1 activate
neighbor 10.10.1.1 send-community extended
neighbor 10.10.2.2 suppress-signaling-protocol ldp
neighbor 10.10.2.2 activate
neighbor 10.10.2.2 send-community extended
neighbor 10.10.2.2 suppress-signaling-protocol ldp
Verifying VPLS
PE-1# show vfi name VPLS30
Legend: RT=Route-target, S=Split-horizon, Y=Yes, N=No
VFI name: VPLS30, state: up, type: multipoint, signaling: BGP

Cisco ASR 903 Specifications

General

Form Factor	Modular
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% non-condensing
Redundancy	Yes, redundant power supplies and route processors
Operating System	Cisco IOS XE
Power Supply	AC or DC
Switching Capacity	240 Gbps
Operating Temperature	-40°C to 65°C (-40°F to 149°F)
MTBF	200, 000 hours
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, T1/E1