Cisco ASR 903 Guide

Basic MPLS VPN Configuration
▀ Configuration of CE Routers
▄ Cisco ASR 903 Router Design and Deployment Guide
54
OL-30526-01
L 172.16.10.1/32 is directly connected, Loopback90
C 172.16.11.0/24 is directly connected, Loopback91
L 172.16.11.1/32 is directly connected, Loopback91
192.168.13.0/29 is subnetted, 1 subnets
B 192.168.13.0 [20/0] via 192.168.40.1, 1d00h
192.168.40.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.40.0/29 is directly connected, BDI41
L 192.168.40.2/32 is directly connected, BDI41
192.168.41.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.41.0/29 is directly connected, BDI42
L 192.168.41.2/32 is directly connected, BDI42
CE1-A# ping 172.16.10.1 source 172.16.0.1 ! connectivity between customerA sites
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
Packet sent with a source address of 172.16.0.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms
CE2# ping 10.5.0.1 source 10.5.10.1 ! connectivity between customerB sites
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.5.0.1, timeout is 2 seconds:
Packet sent with a source address of 10.5.10.1
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms

Cisco ASR 903 Specifications

General

Brand	Cisco
Model	ASR 903
Category	Network Router
Language	English