Cisco ASR 903 Guide

TDM
▀ Structure-Agnostic TDM over Packet (SAToP)
▄ Cisco ASR 903 Router Design and Deployment Guide
82
OL-30526-01
ASR903-R2 Configuration
!
controller E1 0/5/0
framing unframed
cem-group 0 unframed
!
interface Loopback0
ip address 172.16.2.2 255.255.255.255
!
interface GigabitEthernet0/2/1
ip address 10.10.3.1 255.255.255.0
negotiation auto
mpls ip
!
interface CEM0/5/0
no ip address
cem 0
xconnect 172.16.3.3 1001 encapsulation mpls
!
!
router ospf 1
router-id 172.16.2.2
network 172.16.2.2 0.0.0.0 area 0
network 10.10.3.0 0.0.0.255 area 0
!
mpls ldp router-id Loopback0 force
!
ASR903-R3 Configuration:
!
controller SONET 0/4/0
framing sdh
clock source line
aug mapping au-4
!
au-4 1 tug-3 1
mode c-12
tug-2 1 e1 1 cem-group 0 unframed
tug-2 1 e1 1 framing unframed
!
au-4 1 tug-3 2
mode c-12
!
au-4 1 tug-3 3
mode c-12
!
interface Loopback0
ip address 172.16.3.3 255.255.255.255
!
interface GigabitEthernet0/2/1
ip address 10.10.3.2 255.255.255.0

Cisco ASR 903 Specifications

General

Form Factor	Modular
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5% to 95% non-condensing
Redundancy	Yes, redundant power supplies and route processors
Operating System	Cisco IOS XE
Power Supply	AC or DC
Switching Capacity	240 Gbps
Operating Temperature	-40°C to 65°C (-40°F to 149°F)
MTBF	200, 000 hours
Supported Protocols	IPv4, IPv6, MPLS, L2VPN, L3VPN
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, T1/E1