EasyManuals Logo
Home>Cisco>Network Router>ASR 903

Cisco ASR 903 Guide

Cisco ASR 903
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
TDM
Structure-Agnostic TDM over Packet (SAToP)
Cisco ASR 903 Router Design and Deployment Guide
OL-30526-01
85
ASR903-R3#show xconnect all detail
Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State
UP=Up DN=Down AD=Admin Down IA=Inactive
SB=Standby HS=Hot Standby RV=Recovering NH=No Hardware
XC ST Segment 1 S1 Segment 2 S2
------+---------------------------------+--+---------------------------------+--
UP pri ac CE0/4/0:0(SATOP E1) UP mpls 172.16.2.2:1001 UP
Interworking: L2L Local VC label 22
Remote VC label 24
ASR903-R3#show mpls l2 vc 1001 detail
Local interface: CE0/4/0 up, line protocol up, SATOP E1 0 up
Destination address: 172.16.2.2, VC ID: 1001, VC status: up
Output interface: Gi0/2/1, imposed label stack {0 24}
Preferred path: not configured
Default path: active
Next hop: 10.10.3.1
Create time: 01:00:24, last status change time: 00:54:02
Last label FSM state change time: 01:00:24
Signaling protocol: LDP, peer 172.16.2.2:0 up
Targeted Hello: 172.16.3.3(LDP Id) -> 172.16.2.2, LDP is UP
Graceful restart: not configured and not enabled
Non stop routing: not configured and not enabled
Status TLV support (local/remote) : enabled/supported
LDP route watch : enabled
Label/status state machine : established, LruRru
Last local dataplane status rcvd: No fault
Last BFD dataplane status rcvd: Not sent
Last BFD peer monitor status rcvd: No fault
Last local AC circuit status rcvd: No fault
Last local AC circuit status sent: No fault
Last local PW i/f circ status rcvd: No fault
Last local LDP TLV status sent: No fault
Last remote LDP TLV status rcvd: No fault
Last remote LDP ADJ status rcvd: No fault
MPLS VC labels: local 22, remote 24
Group ID: local 0, remote 0
MTU: local 0, remote 0
Remote interface description:
Sequencing: receive disabled, send disabled
Control Word: On (configured: autosense)
SSO Descriptor: 172.16.2.2/1001, local label: 22
Dataplane:
SSM segment/switch IDs: 8194/4096 (used), PWID: 1
VC statistics:
transit packet totals: receive 3725129, send 3412605
transit byte totals: receive 1014481148, send 900927720
transit packet drops: receive 0, seq error 0, send 0

Table of Contents

Other manuals for Cisco ASR 903

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 903 and is the answer not in the manual?

Cisco ASR 903 Specifications

General IconGeneral
BrandCisco
ModelASR 903
CategoryNetwork Router
LanguageEnglish

Related product manuals