Cisco ASR-920-24TZ-M Installation Guide

Contents
4
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation Guide
Connecting to the USB Serial Port Using Microsoft Windows 3-49
Connecting to the Console Port Using Mac OS X 3-50
Connecting to the Console Port Using Linux 3-50
Installing the Cisco USB Device Driver 3-51
Uninstalling the Cisco USB Device Driver 3-52
Connecting to the EIA Console Port 3-52
Connecting a Management Ethernet Cable 3-53
Installing and Removing SFP and SFP+ Modules 3-54
Connecting a USB Flash Device 3-54
Removing a USB Flash Device 3-55
Connecting Timing Cables 3-55
Connecting a Cable to the BITS Interface 3-55
Connecting Cables to the GPS Interface 3-55
Connecting Ethernet Cables 3-57
Connecting Cables to SFP Modules 3-58
Connector and Cable Specifications 3-58
CHAPTER 4 Initial Configuration 4-1
Checking Conditions Prior to System Startup 4-1
Powering Up the Router 4-2
Verifying the Front Panel LEDs 4-7
Verifying the Hardware Configuration 4-7
Checking Hardware and Software Compatibility 4-7
Configuring the Router at Startup 4-8
Accessing the CLI Using the Console 4-8
Configuring Global Parameters 4-9
Checking the Running Configuration Settings 4-10
Saving the Running Configuration to NVRAM 4-10
Safely Powering Off the Router 4-10
Automatic Shutdown of the Router 4-11
CHAPTER 5 Troubleshooting 5-1
Pinouts 5-1
BITS Port Pinouts 5-1
GPS Port Pinout 5-2
Time-of-Day Port Pinouts 5-2
Alarm Port Pinouts 5-3
Management Ethernet Port Pinouts 5-3
USB Console Port Pinouts 5-4

Cisco ASR-920-24TZ-M Specifications

General

Brand	Cisco
Model	ASR-920-24TZ-M
Category	Network Router
Language	English