Cisco ASR1001 User Manual

2-16
Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide
OL-9403-04
Chapter 2 Installing the Access Point
Mounting Overview
Figure 2-12 Attaching the Access Point to the Flush-Mount Bracket
Step 7
Attach the cables to the sides of the access point (the Ethernet cable, optional external antenna cable(s),
optional power supply cable, and optional Kensington MicroSaver security cable).
Note Ensure that the cables are routed away from the access point integrated antennas.
Note When the access point is powered up and is associated with a controller (Power LED is green,
Alarm LED is off, and the radio LEDs are blinking), the access point is broadcasting its beacon.
Step 8 Repeat Steps 1 to 7 for each flush-mount bracket location.
After mounting all your flush-mount access points, return to deploying the access points, "Step 3-c" on
page 2-7.
135672

Cisco ASR1001 Specifications

General

Brand	Cisco
Model	ASR1001
Category	Wireless Access Point
Language	English