C-1
Cisco Aironet 1000 Series Lightweight Access Point Hardware Installation Guide
OL-9403-04
APPENDIX
C
Access Point Specifications
Table C-1 lists the technical specifications for the Cisco Aironet 1000 Series Lightweight Access Point.
Table C-1 Access Point Specifications
Category
Specifications
802.11b 802.11g 802.11a
Size 5.7 in. W x 1.6 in. D x 9.6 in. H
24.4 cm W x 4.1 cm D x 24.4 cm H
Indicators Four indicators on the top of the unit: Power, Alarm, 2.4 GHz, 5 GHz.
Connectors Right side:
5-GHz RP-TNC antenna connector, 2.4-GHz RP-TNC antenna connector
Left side:
2.4-GHz RP-TNC antenna connector, power connector (for 48VDC AC power module), RJ-45
connector for 10BASE-T or 100BASE-T Ethernet connections.
Input voltage 48 VDC (nominal)
Input power 12 W
Operating temperature 32 to 104
o
F (0 to 40
o
C)
Storage temperature –13 to 158
o
F (–25 to 70
o
C)
Humidity 10 to 90% non-condensing
Weight With ceiling-mount clips: 1.3 lbs (0.6 kg)
With optional wall brackets: 2.2 lbs (1 kg)
Modulation Complementary Code Keying
(CCK)
Orthogonal Frequency Division Multiplex (OFDM)
Subcarrier modulation BPSK (1 Mbps)
QPSK (2 Mbps)
CCK (5.5 and 11 Mbps)
BPSK (6 and 9 Mbps)
QPSK (12 and 18 Mbps)
16-QAM (24 and 36 Mbps)
64-QAM (48 and 54 Mbps)
BPSK (6 Mbps and 9 Mbps)
QPSK (12 Mbps and 18 Mbps)
16-QAM (24 and 36 Mbps)
64-QAM (48 and 54 Mbps)
To Next Page
Loading...
Need help?
General
