Cisco ASR1002 - ASR 1002 Router - Page 32

PurposeCommand or Action
Example:
(config-router)#
authentication-type md5 level-2
• test—Clear text authentication.
• level-1—Enables the specified authentication for Level 1 packets only.
• level-2—Enables the specified authentication for Level 2 packets only.
Enables the authentication for IS-IS.
authentication key-chain name-of-chain
{level-1 | level-2}
Step 8
•
name-of-chain—Identifies a group of keys that are valid.
Example:
(config-router)# authentication
key-chain abc level-2
• level-1—Enables authentication for Level 1 packets only.
• level-2—Enables authentication for Level 2 packets only.
Cisco Network Positioning System Configuration Guide for the Cisco ASR 1000 Router, Release 1.0
26 OL-25794-01
Configuring the Routing Protocols Used for Network Proximity
Configuring IS-IS for Proximity Calculations