Cisco C1101-4P Hardware Installation Guide

Control SourceDescriptionLED ColorPort
I/O sideOff: No USB device
discovered.
Green
USB
On: USB device
discovered.
Table 4: LED Indicators for C1101 and C1109
Control SourceDescriptionColorLED
I/OSystem power status
Off: No power
Greensteady on: Normal
operation
Green blink: Boot up
phase or in ROM monitor
mode
Amber steady on or
blink: Some issues with
the system.
Green+AmberPower
I/OVPN Status
Off: No tunnel
Steady on:At least one
tunnel is up
GreenVPN OK
I/OLink activity
Off: No link
Steady on: Link
Blink: TXD/RXD Data
GreenEthernet switch GE LAN
ports
I/OLink activity
Off: No link
Steady on: Link
Blink: TXD/RXD Data
GreenGE WAN ports
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
19
Overview of Cisco 1000 Series Integrated Services Routers
LED Indicators

Cisco C1101-4P Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	-
WLAN data transfer rate (max)	- Mbit/s
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	4
Security algorithms	AES, WPA2
Product type	Tabletop router
Product color	Gray
Country of origin	China
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	30 W
Internal memory	4000 MB
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	0 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85176990
Package depth	333.502 mm
Package width	254 mm
Package height	177.8 mm
Package weight	3083.9 g