Cisco C1101-4P Hardware Installation Guide

CONTENTS
Overview of Cisco 1000 Series Integrated Services Routers 1
CHAPTER 1
About Cisco 1000 Series Integrated Service Routers 1
Chassis Views 4
LED Indicators 13
Reset Button 20
Power Supply 20
Slots and Interfaces 21
About Slots, Subslots, and Port Numbering 21
Specifications of Cisco 1000 Series Integrated Services Routers 21
Periodic Inspection and Cleaning 21
Prepare for Router Installation 23
CHAPTER 2
Safety Recommendations 23
Safety With Electricity 24
Prevent Electrostatic Discharge Damage 24
General Site Requirements 24
Site Selection Guidelines 25
Rack Requirements 25
Safety Recommendations 26
Power Guidelines and Requirements 26
Network Cabling Specifications 27
Console Port Considerations 27
EIA/TIA-232 27
USB Serial Console 28
Console Port Considerations 28
Prepare for Router Installation 29
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
iii

Cisco C1101-4P Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	-
WLAN data transfer rate (max)	- Mbit/s
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	4
Security algorithms	AES, WPA2
Product type	Tabletop router
Product color	Gray
Country of origin	China
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	30 W
Internal memory	4000 MB
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	0 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85176990
Package depth	333.502 mm
Package width	254 mm
Package height	177.8 mm
Package weight	3083.9 g