Cisco C1101-4P Hardware Installation Guide

Install Small Form Pluggable Module 61
Remove Small Factor Pluggable Module 61
Install a Pluggable Interface Module 62
Install a Pluggable Interface Module on a C1101-4P 62
Configuring a Pluggable Interface Module 68
RF Band Mapping for Antenna Ports (For P-5GS6-GL only) 70
LED Behaviors 71
Attaching the Antennas 72
Install a Micro-SIM Card into a USB LTE Dongle 74
Antenna Mounting Instructions 76
Rack Mount of the Antenna 76
Wall Mount of the Antenna 78
Ceiling Mount of the Antenna 80
Installing a SIM Card on C111X, C1109-2PX, C1109-4P 82
ROM Monitor Overview 85
CHAPTER 5
ROM Monitor Overview 85
Supplier Declaration of Conformity 87
CHAPTER 6
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
v
Contents

Cisco C1101-4P Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	-
WLAN data transfer rate (max)	- Mbit/s
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	4
Security algorithms	AES, WPA2
Product type	Tabletop router
Product color	Gray
Country of origin	China
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	30 W
Internal memory	4000 MB
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	0 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 85 %
Quantity per pack	1 pc(s)
Harmonized System (HS) code	85176990
Package depth	333.502 mm
Package width	254 mm
Package height	177.8 mm
Package weight	3083.9 g