To Next PageTo Next Page
Need help?Do you have a question about the Cisco C9200CX-8P-2X2G-A and is the answer not in the manual?
General| Model | C9200CX-8P-2X2G-A |
|---|---|
| Category | Switch |
| Power over Ethernet (PoE) | Yes |
| Stackable | Yes |
| DRAM | 4 GB |
| Flash Memory | 4 GB |
| Ports | 8 x 1G PoE+ ports |
| Management | CLI, WebUI |
| Weight | 3.10 kg |
| Power Supply | Internal |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Operating Humidity | 10% to 90% (non-condensing) |
Explains the conventions used in the document for formatting and symbols.
Lists other Cisco documentation relevant to the product.
Provides guidance on how to get more Cisco documentation and support.
Describes the different compact switch models available for the Cisco Catalyst 9200CX series.
Details the physical components located on the front panel of the switch.
Describes the physical components and connectors on the rear panel of the switch.
Refers to the switch software configuration guide for network setup concepts.
Provides critical safety precautions to follow before and during installation.
Outlines recommended practices and conditions for installing the switch.
Specifies the environmental and physical conditions necessary for proper switch operation.
Details the procedure to power on and test the switch before final installation.
Lists the items typically included in the shipping box for the switch.
Describes various methods for physically mounting the compact switch.
Explains how to establish a proper earth ground connection for the switch.
Details how to install an optional bracket for securing the power adapter.
Describes the optional procedure for installing a power cord retainer.
Explains how to install an optional cable guard for security.
Provides instructions for installing SFP or SFP+ modules into the switch.
Describes how to connect devices using PoE and PoE+ ports.
Explains how to configure and connect devices to Ethernet ports.
Guides users on configuring the switch via its web-based graphical interface.
Details how to configure the switch using the command-line interface (CLI).
Explains how to connect to the switch's CLI using console ports.
Lists the environmental operating ranges and physical dimensions of the switch.
Provides the weight specifications for different switch models.
Explains the status indicated by the System LED on the switch.
Describes the meanings of the Status (STAT) LED for monitoring switch status.
Explains the function of the Speed LED for indicating port link speed.
Details the status indicated by the PoE LED for power over Ethernet functionality.
Describes the port LEDs and how to change modes to interpret their status.
Explains the status indicated by the PD Power LED for the switch's power delivery status.
Describes the function of the Beacon LED for identifying the switch.
