
Do you have a question about the Cisco C9200L-24P-4X and is the answer not in the manual?
| Model | C9200L-24P-4X | 
|---|---|
| Device Type | Switch | 
| Enclosure Type | Rack-mountable | 
| Ports | 24 x 10/100/1000 (PoE+) | 
| Switching Capacity | 128 Gbps | 
| Forwarding Rate | 95.23 Mpps | 
| PoE Budget | 370W | 
| Layer | Layer 3 | 
| Stacking Bandwidth | 80 Gbps | 
| RAM | 4 GB | 
| Flash Memory | 4 GB | 
| Power Device | Internal power supply | 
| Voltage Required | AC 120/230 V (50/60 Hz) | 
| Uplink Interfaces | 4 x 10 Gigabit Ethernet | 
| MAC Address Table Size | 16000 entries | 
| Routing Protocol | OSPF, BGP, EIGRP, RIP | 
| Remote Management Protocol | SNMP, CLI, HTTP, HTTPS, SSH | 
| Features | Energy Efficient Ethernet, DHCP snooping, QoS, VLAN support, ACLs | 
| Compliant Standards | IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.1x | 
| Operating Temperature | 0 to 45 °C | 
| Operating Humidity | 5% to 90% (non-condensing) | 












Loading...