
Do you have a question about the Cisco C9200L-24T-4X and is the answer not in the manual?
| Model | C9200L-24T-4X |
|---|---|
| Device Type | Switch |
| Enclosure Type | Rack-mountable |
| Subtype | Gigabit Ethernet |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.23 Mpps |
| DRAM | 4 GB |
| Flash Memory | 4 GB |
| Power Device | Internal power supply |
| Ports | 24 x 10/100/1000 |
| Uplink Interfaces | 4 x 10 Gigabit SFP+ |
| MAC Address Table Size | 16, 000 entries |
| Jumbo Frame Support | 9198 bytes |
| Routing Protocol | OSPF, BGP, EIGRP, RIP |
| Remote Management Protocol | SNMP 1, SNMP 2, SNMP 3, RMON, SSH, Telnet, HTTP, HTTPS |
| Features | VLAN support, Quality of Service (QoS), ACL support |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3ae |
| Voltage Required | AC 120/230 V (50 - 60 Hz) |
| Stacking | Stackable |
| Operating Temperature | 32 to 104°F (0 to 40°C) |












Loading...