Cisco Catalyst 2950 Getting Started Guide

Getting Started Guide
Catalyst 2950 Switch Getting Started Guide
INCLUDING LICENSE AND WARRANTY
1 About this Guide
2 Taking Out What You Need
3 Running Express Setup
4 Managing the Switch
5 Rack-Mounting
6 Connecting to DC Power
7 In Case of Difficulty
8 Obtaining Documentation
9 Obtaining Technical Assistance
10 Cisco Limited Lifetime Hardware Warranty Terms

Cisco Catalyst 2950 Specifications

General

Forwarding Bandwidth	8.8 Gbps
Switching Capacity	13.6 Gbps
Forwarding Rate	6.6 Mpps
Weight	3.6 kg
RAM	16 MB
Flash Memory	8 MB
Operating Humidity	10% to 85% non-condensing
Uplink Ports	2 x 10/100/1000Base-T
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Status Indicators	system
Operating Temperature	0 to 45°C
Ports	24 x 10/100 Ethernet ports
MAC Address Table Size	8, 192 entries
Power Supply	Internal 100-240V AC, 50-60Hz