Cisco CATALYST 2960 - Taking out What You Need; Equipment that You Supply to Run Express Setup

Chapter 1 Getting Started Guide
Taking Out What You Need
1-2
Catalyst 2960 Switch Getting Started Guide
OL-9368-03
Taking Out What You Need
Follow these steps:
1. Unpack and remove the switch and the accessory kit from the shipping box.
2. Return the packing material to the shipping container, and save it for future
use.
3. Verify that you have received the items shown in the “Shipping Box
Contents” section. If any item is missing or damaged, contact your Cisco
representative or reseller for instructions. Some switch models might include
additional items that are not shown.
Equipment That You Supply to Run Express Setup
You need to supply this equipment to run Express Setup:
• PC
• Ethernet (Category 5) straight-through cable (as shown)