Cisco Catalyst 3120 Hardware Installation Guide

2-5
Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide
OL-12246-01
Chapter 2 Switch Installation
HP c-Class BladeSystem Enclosure Architecture
HP c-Class BladeSystem Enclosure Architecture
Figure 2-1 shows the rear view of the blade enclosure in which you install the switch module.
Figure 2-1 Rear View of the Blade Enclosure
Consider these prerequisites before installing your switch module:
• Plan for optimal airflow.
• Fill any unoccupied server slot bays or power module bays with blanks.
• Bays 1 through 8 are available for Ethernet switch modules.
• See the server enclosure documentation for information on the port mapping between blade
enclosures and the switch modules.
1 Blade enclosure rear view 7 Interconnect module bay 5
2 Blade enclosure fans 8 Interconnect module bay 6
3 Interconnect bay 1 with switch module installed 9 Interconnect module bay 7
4 Interconnect module bay 2 10 Interconnect module bay 8
5 Interconnect module bay 3 11 Onboard Administrator module
6 Interconnect module bay 4
153140
1
3
5
7
9
11
2
2
4
6
8
10

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English