Cisco Catalyst 3850 Command Reference Guide

debug energywise
To debug EnergyWise endpoints and management stations, use the debug energywise privileged EXEC
command.
debug energywise{debug| discovery| endpoint| ha| management| packet| query| trace| wol}
Syntax Description
Displays errors such as invalid sequence numbers and communication errors on
the domain.
debug
Displays all EnergyWise discovery information.discovery
Displays information about EnergyWise endpoints running a client or agent and
helps detect mismatched domain names, secrets, and sequence numbers of connected
endpoints.
endpoint
Displays EnergyWise high availability (HA) information for devices that have HA
capability.
ha
Displays information about authentication failures and EnergyWise management
stations running power management applications.
management
Displays EnergyWise packet trace information.packet
Displays query information with respect to the device from which the query is
initiated.
query
Displays information about all the EnergyWise processes with respect to the device
from which the query is initiated.
trace
Displays Wake on LAN (WoL) query information with respect to the device from
which the query is initiated.
wol
Command Default
EnergyWise debugging is disabled.
Command Modes
Privileged EXEC
Command History
ModificationFirst EW
Version
Release
This command was introduced.2.8Cisco IOS XE 3E
Cisco EnergyWise Cisco IOS Command Reference for Catalyst 3850 Switches, EnergyWise Version 2.8
4 OL-32343-01
EnergyWise Commands
debug energywise

Cisco Catalyst 3850 Specifications

General

Stacking Bandwidth	480 Gbps
Max Stacking Units	9
Form Factor	Rack-mountable
RAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3850
Ports	24 or 48 Gigabit Ethernet ports
Uplink Interfaces	4 x 1GE, 2 x 10GE, or 4 x 10GE
Power Supply	Redundant power supplies
Dimensions	44.5 x 44.8 x 4.45 cm
Weight	7.6 kg
Features	IPv6
Power over Ethernet (PoE)	PoE, PoE+, UPOE (varies by model)
Operating Temperature	0 to 40°C