Cisco Catalyst 3850 - Data Stack Cabling Configurations; Data Stack Bandwidth and Partitioning Examples

This example shows how to enable the EnergyWise domain member to send only event traps to the NMS:
DomainMember(config)# snmp-server enable traps energywise event-occured
Related Commands
DescriptionCommand
Displays the EnergyWise settings and status.show energywise, on page 22
Displays the operating configuration.show running config
Cisco EnergyWise Cisco IOS Command Reference for Catalyst 3850 Switches, EnergyWise Version 2.8
30 OL-32343-01
EnergyWise Commands
snmp-server enable traps energywise