Cisco Catalyst C9300-48T User Manual

Table 46: AC Power Cords for PWR-C1-1100WAC, PWR-C1-715WAC, PWC-C1-350WAC, PWR-C1-1100WAC-P, PWR-C1-715WAC-P, and
PWC-C1-350WAC-P Power Supplies
LengthCordset RatingPart NumberLocale
2.5 m250 VAC, 10 ACAB-TA-ARArgentina
2.5 m250 VAC, 10 ACAB-TA-APAustralia
2.5 m125 VAC, 12 ACAB-ACBZ-12ABrazil
2.5 m250 VAC, 10 ACAB-ACBZ-10ABrazil
2.5 m250 VAC, 10 ACAB-TA-CNChina
2.5 m250 VAC, 10 ACAB-TA-DNDenmark
2.5 m250 VAC, 10 ACAB-TA-EUEurope
2.5 m250 VAC, 10 ACAB-TA-INIndia
2.5 m250 VAC, 16 ACAB-TA-ISIsrael
2.5 m250 VAC, 10 ACAB-TA-ITItaly
2.5 m125 VAC, 12 ACAB-TA-JP
9
Japan
2.5 m250 VAC, 12 ACAB-TA-250VAC-JPJapan
2.5 m250 VAC, 10 ACAB-AC-C15-KORKorea
2.5 m125 VAC, 12 ACAB-TA-NANorth America
2.5 m250 VAC, 10 ACAB-TA-SWSwitzerland
2.5 m125 VAC, 15 ACAB-AC-C15-TWTaiwan
2.5 m250 VAC, 10 ACAB-TA-UKUnited Kingdom
1.22 m250 VAC, 13 ACAB-C15-CBNCabinet jumper power
cord, C14-C15 connectors
9
Note
This power cord is not rated for use with PWR-C1-1100WAC or PWR-C1-1100WAC-P
power supplies.
The following table lists the specifications for the AC power cords that are available for PWR-C1-1900WAC-P
power supplies.
Table 47: AC Power Cords for PWR-C1-1900WAC-P
LengthCordset RatingPart NumberLocale
4.25 meter (m)250 VAC, 20 AC9K-PWR-CAB-AC-USNorth America
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
119
Technical Specifications
Technical Specifications

Cisco Catalyst C9300-48T Specifications

General

Total Ports	48
Default AC Power Supply	715W AC
Switching Capacity	176 Gbps
DRAM	8 GB
Flash Memory	16 GB
Rack Units (RU)	1 RU
Stacking Bandwidth	480 Gbps
Weight	7.25 kg
Power Supply Options	1100W AC
Operating Temperature	0 to 45°C
Operating Humidity	5 to 90% relative humidity
Uplink Ports	4 x 1G Network Module uplink ports (Optional)