Cisco DMS-DMP-4300G - Mount or Unmount a Network Share; Reference; UI Reference Topics

12-3
User Guide for Cisco Digital Media Player Device Manager 5.2.x
OL-15764-03
Chapter 12 File Storage
Reference
After you click Apply, the entry or change takes effect. However, the previously defined value will return
the next time that your DMP restarts.
Step 3 (Optional) Would you like to put all changed values into effect permanently, so that they persist even
after your DMP restarts? Choose Administration > Save Configuration an
d, when the Save
Configuration page appears, click Save.
It is not necessary to restart your DMP.
Step 4 Stop. You have completed this procedure.
Related Topics
• UI Reference: Elements to Define Internal Storage Settings, page 12-4
Mount or Unmount a Network Share
Note DMPs can mount only one shared volume at a time.
Procedure
Step 1 Click Manage WAAS Share in the Administration list.
Step 2 Enter or edit the required values, and then click Apply.
Step 3 Do one of the following.
• Click Mount Share to connect your DMP to this network share immediately.
• Click Unmount to disconnect your DMP from this share.
Step 4 Stop. You have completed this procedure.
Related Topics
• UI Reference: Elements to Define Network Share Settings, page 12-4
• Enable or Disable Types of Access to Your DMP, page 9-6
Reference
• UI Reference Topics, page 12-3
UI Reference Topics
• UI Reference: Elements to Define Internal Storage Settings, page 12-4
• UI Reference: Elements to Define Network Share Settings, page 12-4