CHAPTER
10-1
User Guide for Cisco Digital Media Player Device Manager 5.2.x
OL-15764-03
10
Configure Settings for Touchscreens,
Projectors, and Displays
Revised: March 13, 2012
•
Concepts, page 10-1
• Procedures, page 10-2
• Reference, page 10-7
Concepts
• Overview, page 10-1
• Example Settings for DMP Display Attributes, page 10-1
Overview
A DMP transmits signals to a public presentation system of some kind, such as a monitor or projector
that is connected to the DMP. This presentation system might use projection or display technologies that
are analog or digital, and its output fidelity depends in part upon which signal cables (and adapters)
connect it to your DMP.
Example Settings for DMP Display Attributes
When you use an HDMI cable to connect your DMP to a 1920 x1200 LCD flat panel display:
• Display Standard — VESA_1920x1200x60RB
• Display Output Interface — HDMI
• Color Space — RGB_16_235
• Color Component Order — RGB
To Next Page
Loading...
Need help?
General
