Contents
iv
User Guide for Cisco Digital Media Player Device Manager 5.2.x
OL-15764-03
DMP 4310G Notice Regarding Power over Ethernet (PoE) 4-1
Procedures 4-2
Receive Electrical Power from a 100V–240V AC Socket 4-2
Receive Electrical Power from 802.3af Power over Ethernet (PoE) 4-3
CHAPTER
5 Connect to a Network 5-1
Concepts 5-1
Understand Whether the IP Address Will Be Static or Dynamic 5-1
Procedures 5-2
Connect Over Ethernet 5-2
Connect Over Wireless (802.11 b/g) 5-2
CHAPTER
6 Connect to a Presentation System 6-1
Concepts 6-1
Understand S-Video Limitations 6-2
Understand How HDMI and DVI Differ 6-2
Understand Which Displays Work Best with DMPs 6-3
Understand How to Choose Media Signal Cables 6-3
Understand How to Work Around the Low Signal Quality of Composite Video 6-5
Procedures 6-5
Use an HDMI Connection 6-5
Use a Connection that Combines HDMI with DVI 6-6
Connect to a Touchscreen 6-7
Connect to an Analog Display or Projector 6-8
PART
2 Use DMPDM
CHAPTER
7 Log in to DMPDM 7-1
Procedures 7-1
Log in 7-1
CHAPTER
8 Start Here 8-1
Concepts 8-1
DMPDM Workflow 8-1
DMPDM Differences by Firmware Release and DMP Model 8-2
DMPDM on a DMP 4305G 8-2
DMPDM on a DMP 4310G 8-3
DMPDM on a DMP 4400G 8-4
To Next Page
Loading...